Victron Phoenix Smart IP43 Charger 1+1 (12V / 50A / 230V)
Victron
Recommended Retail Price
£498.24 Inc. VAT
Online Price (inc. VAT)
£409.80
- Description
- Ask a Question
- Reviews
- Delivery
- Returns
Victron Smart IP43 charger was created with boat owners in mind. This 1+1 model adaptive 5-step charger can provide 3A to the starter-battery, the rest to the 'house' bank. 12V model with 50A charge. Victron's Smart charger is Bluetooth enabled, so you can monitor the charger and set alarms straight from your phone. Adaptive, intelligent, dynamic charge features – see below.
Victron PSC125051085 Smart Charger Features:
- Bluetooth Smart built-in - The wireless solution to set-up, monitor, control and update Smart IP43 Chargers.
- Smart IP43 Charger (1+1): two outputs to charge 2 battery banks - The second output, limited to approximately 3A and with a slightly lower output voltage, is intended to top up a starter battery.
- Automatic voltage compensation - The charger compensates for voltage drop over the DC cabling by slightly increasing output voltage when the DC current increases.
- Adaptive 6-stage charge algorithm: bulk - absorption - recondition - float - storage - refresh - The Smart IP43 Charger features our well-known 'adaptive' battery management system that can be pre-set to suit different types of batteries. The ‘adaptive’ feature will automatically optimise the charge process relative to the way the battery is being used.
- The right amount of charge: variable absorption time - When only shallow discharges occur (a yacht connected to shore power for example) the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery will be fully charged.
- Preventing damage due to excessive gassing: the BatterySafe mode - If, in order to quickly charge a battery, a high charge current in combination with a high absorption voltage has been chosen, the charger will prevent damage due to excessive gassing by automatically limiting the rate of voltage increase once the gassing voltage has been reached.
- Less maintenance and aging when the battery is not in use: the Storage Mode - The Storage Mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the Storage Mode float voltage is reduced to 2.2V/cell (13.2V for a 12V battery) to minimise gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to 'equalise' the battery. This feature prevents stratification of the electrolyte and Sulphation, a major cause of early battery failure.
- Also charges Li-ion (LiFePO4) batteries - Charger on-off control can be implemented by connecting a relay or open collector optocoupler output from a Li-ion BMS to the remote on/off port. Alternatively full control of voltage and current can be achieved with Bluetooth.
- Fully programmable charge algorithm - The charge algorithm can be programmed with help of Bluetooth or the VE.Direct interface. Three pre-programmed algorithms can be selected with the mode button.
- Optional external battery voltage and temperature sensing via Bluetooth - A Smart Battery Sense, SmartShunt or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to one or more Smart IP43 Chargers via VE.Smart Networking.
- Remote on/off - The remote on/off consists of two terminals: Remote H and Remote L. A remote on/off switch or relay contact can be connected between H and L. Alternatively, terminal H can be pulled high, or terminal L can be pulled low.
- VE.Direct interface - For a wired data connection to a GX device such as the Cerbo GX, PC or other devices. Also enables Instant Readout functionality via VictronConnect remotely from VRM.
- Programmable relay - Can be programmed using the VE.Direct interface or a Bluetooth enabled device to trip on an alarm or other events.
Approvals | EN 60335-1, EN 60335-2-29, EN 55014-1, EN 61000-6-3, EN 61000-3-2, EN 55014-2, EN 61000-6-1, EN 61000-6-2, EN 61000-3-3, IEC68-2-6:10-150Hz/1.0G |
Height Description | 180mm (7.1") |
Material | Aluminium |
Operating Temperature | -20°C to +60°C (0°F - 140°F) |
Rating | IP43 electronic components, IP22 connection area |
Voltage Description | Input: 230V AC (210-250V AC) / 290-355V DC, Output: 14.4V DC Absorption, 13.8V DC Float, 13.2V DC Storage |
Width | 249mm (9.8") |
Brand | Victron |
Style | Fixed Position Battery Chargers |
Charger Outputs | 2 |
Charger Short Circuit Protection | Yes |
Country of Origin | Netherlands |
Frequency Description | Input: 45 - 65Hz |
Amps Description | Up to 50A |
Depth | 100mm (4") |
Showroom & Postal Address:
Chas Newens Marine Company Limited
Ashlone Wharf Boat Yard
Embankment
Putney
London
SW15 1LB
Phone:
0208 788 4587
Delivery
Our Mail Order team ship chandlery, yacht parts and sailing clothing around the world. We try to use the best value couriers available, and we will endeavour to get your products to you as quickly and as cost effectively as possible.
As with everything automatic, sometimes it might not present you with the best value price, please feel free to contact our helpful team who will endeavour to provide you with our best price for shipping to your address.
UK Standard Delivery
Please use the checkout process to get an accurate shipping quote for your cart, all of our rates are automatically calculated based upon your selections.
As with everything automatic, sometimes it might not present you with the best value price, please feel free to contact our helpful team who will endeavour to provide you with our best price for shipping to your address.
International Delivery
International Delivery is calculated based on a series of complex formulae at checkout and includes options such as UPS International. If you cannot see a rate at checkout, please contact us.
Delivery further information
The delivery charge is automatically added to your order and you will see the total amount you have to pay before you confirm the order. Unfortunately we have to charge carriage but we do attempt to keep it to a minimum where possible
All orders leaving us require a signature, and the delivery could take place any time between 8am and 6pm depending on the courier used. If you are liable to be out, please give an alternative delivery address or type instructions into the notes section as you place your order.
Standard Service; We will aim to dispatch goods within 3 working days. Delivery on the standard service is via courier, will require a signature and we aim to deliver within 5 working days. This service will only arrive on working days.
Courier delivery; The majority of our parcels will be sent via a courier, the bulk of which are with APC Streetwise. Please be aware that they advertise their delivery times as anywhere between 8am - 6pm Monday to Friday. We are not able to dictate to them a time slot. And in most cases a signature will be required.
New! For 2020 – Putney EmbankmentClick & Collect service; New for 2020 finds our first ever collection point on the Putney Embankment. Please select Pick Up at checkout to activate the service
NB; For orders to mainland Europe and Rest of World, the cost for carriage is calculated on order package weight and final destination. The price given at checkout is a guide only and an accurate postage cost will be calculated and invoiced to you if a supplement is required. If you would like to know this figure before despatch please feel free to contact us for a quote. Please be advised that if your order is sent via courier outside of the EU you may need to pay for import/custom taxes after the order has been delivered to you. This is standard procedure by the courier to ensure that your order is delivered to you as soon as possible and not delayed in customs. These charges are solely dependent on your local customs office and the courier, we have no control over these charges. We would kindly suggest contacting your local customs office for more information and advice. Additional charges for customs clearance must be borne by you; unfortunately, we have no control over these charges and cannot predict what they may be. We are unable to reimburse any costs incurred regardless of the circumstances.
ANTIFOUL & PAINT ORDERS; Please be aware that we can only send antifoul & Paint products within GB Mainland. We CANNOT send antifoul & paint outside of GB Mainland. If you have any questions regarding this please feel free to contact our Mail order department.
LIFEJACKETS & CO2 CANNISTERS; Please be aware that we cannot currently send lifejackets with CO2 cannisters included outside of GB Mainland
LIQUIDS & CHEMICALS; Please note we are unable to deliver liquids or chemicals overseas or to highlands and island addresses. We will also have to use a courier service within GB Mainland for liquids or chemicals.
SALE OF KNIVES; In accordance with UK Law (The Offensive Weapons Act 1996), we are unable to sell knives to anyone under 18 years of age. We are unable to send knives to overseas destinations. You must upload a copy of a valid identity document to your order at time of ordering or your order will be cancelled. Knives must be sent on a signature courier service. Valid forms of ID are EU Passports, EU Photocard Driving Licence, MOD Form 90 ID Card, EU Member State National Identity Card, “PASS” ID Cards.
Last Updated 2nd September 2020
Our returns policy on items shipped within the UK is as follows:
To qualify for a refund you have 14 days from receipt of your order to notify us that you wish to cancel the order and return the goods. You then have 14 days to return the goods to us at your own expense. If you fail to notify us of your desire to cancel the order and return the goods within 14 days of receipt you are not entitled to a refund. If you do not return the goods to us within 14 days after notification you are not entitled to a refund.
Your items should be unused and in the same condition as received. They should also be in the original packaging.
To complete your return, we require a receipt or proof of purchase.
Please do not send your purchase back to the manufacturer.
If goods are faulty or damaged on receipt we will ask for photographic evidence of the fault or damage where feasible.
To read our full returns and exchanges policy, please click here.
Overseas orders may be refunded if the item is returned but we cannot refund the cost of shipping.