{"title":"PSP Tapes","description":"\u003cp\u003e\u003cspan\u003ePSP, was first established in the sixties and now manufactures an extensive range of high performance marine repair tapes from modern production facilities in Southampton, U.K. Our comprehensive range is constantly being developed and is represented throughout the world by a wide network of distributors; ultimately available to the end user through yacht chandlers and on-line resellers. Look out for PSP, easily recognised by the international flag code “Papa Sierra Papa”.\u003c\/span\u003e\u003c\/p\u003e","products":[{"product_id":"p122525040","title":"PSP 7 Day Blue Paper Masking Tape 25mm x 25m","description":"\u003cp\u003eA high performance creped paper tape for interior and exterior masking, as used by the professionals. Removes cleanly up to 7 days.\u003c\/p\u003e\n\u003cp\u003eSizes:\u003cbr\u003e\n19mm x 25m\u003cbr\u003e\n25mm x 25m\u003cbr\u003e\n38mm x 25m\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirections for use:\u003c\/strong\u003e\u003cbr\u003e\nIf the product has a backing paper or film, remove this before use. Ensure the surface is clean and dry. Once tape is in the correct position, press down firmly. Apply tension if the application is to coil wrap. Best results are Achieved when used at room temperature.\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part Number: P122525040\u003c\/strong\u003e\u003c\/p\u003e","brand":"PSP","offers":[{"title":"Default Title","offer_id":58637498777974,"sku":"T1820","price":12.72,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1078\/5560\/files\/7-Day-Blue-Paper-Masking-Tape.png?v=1788855738"},{"product_id":"b122550040","title":"PSP 7 Day Blue Paper Masking Tape 25mm x 50m","description":"\u003cp\u003eA high performance creped paper tape for interior and exterior masking, as used by the professionals. Removes cleanly up to 7 days.\u003c\/p\u003e\n\u003cp\u003eSizes:\u003cbr\u003e\n19mm x 25m\u003cbr\u003e\n25mm x 25m\u003cbr\u003e\n38mm x 25m\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirections for use:\u003c\/strong\u003e\u003cbr\u003e\nIf the product has a backing paper or film, remove this before use. Ensure the surface is clean and dry. Once tape is in the correct position, press down firmly. Apply tension if the application is to coil wrap. Best results are Achieved when used at room temperature.\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part Number: B122550040\u003c\/strong\u003e\u003c\/p\u003e","brand":"PSP","offers":[{"title":"Default Title","offer_id":58637499007350,"sku":"T1821","price":17.88,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1078\/5560\/files\/7-Day-Blue-Paper-Masking-Tape_865b6186-4197-40a9-b968-b8bb7b131623.png?v=1788855740"},{"product_id":"p121825000","title":"PSP 80ºC Paper Masking Tape 18mm x 25m","description":"\u003cp\u003eA marine and automotive quality creped paper masking tape to achieve a professional finish. Temperature resistant to 80ºC\u003c\/p\u003e\n\u003cp\u003eSizes:\u003cbr\u003e\n18mm x 25m\u003cbr\u003e\n25mm x 25m\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirections for use:\u003c\/strong\u003e\u003cbr\u003e\nIf the product has a backing paper or film, remove this before use. Ensure the surface is clean and dry. Once tape is in the correct position, press down firmly. Apply tension if the application is to coil wrap. Best results are Achieved when used at room temperature.\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part Number: P121825000\u003c\/strong\u003e\u003c\/p\u003e","brand":"PSP","offers":[{"title":"Default Title","offer_id":58637499105654,"sku":"T1800","price":6.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1078\/5560\/files\/80oC-Paper-Masking-Tape.png?v=1788855740"},{"product_id":"p122525000","title":"PSP 80ºC Paper Masking Tape 25mm x 25m","description":"\u003cp\u003eA marine and automotive quality creped paper masking tape to achieve a professional finish. Temperature resistant to 80ºC\u003c\/p\u003e\n\u003cp\u003eSizes:\u003cbr\u003e\n18mm x 25m\u003cbr\u003e\n25mm x 25m\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirections for use:\u003c\/strong\u003e\u003cbr\u003e\nIf the product has a backing paper or film, remove this before use. Ensure the surface is clean and dry. Once tape is in the correct position, press down firmly. Apply tension if the application is to coil wrap. Best results are Achieved when used at room temperature.\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part Number: P122525000\u003c\/strong\u003e\u003c\/p\u003e","brand":"PSP","offers":[{"title":"Default Title","offer_id":58637499367798,"sku":"T1801","price":7.15,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1078\/5560\/files\/80oC-Paper-Masking-Tape_46755a7a-71e4-4cd9-9b4f-f05f12c429a3.png?v=1788855741"},{"product_id":"pacroll250","title":"PSP Anti-Chafe Tape 50mm x 2m","description":"\u003cp\u003ePrevent damage to gel coat, paint and varnish work and reduce friction on areas of contact with sails, ropes and blocks. A tough low friction clear film for lamination to high wear areas.\u003c\/p\u003e\n\u003cp\u003eRetail Sizes:\u003cbr\u003e\n130 micron thickness: 50mm x 3m\u003cbr\u003e\n250 micron thickness: 50mm x 2m\u003c\/p\u003e\n\u003cp\u003eTrade Sizes:\u003cbr\u003e\n50mm x 16.5m\u003cbr\u003e\n75mm x 16.5m\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirections for use:\u003c\/strong\u003e\u003cbr\u003e\nIf the product has a backing paper or film, remove this before use. Ensure the surface is clean and dry. Once tape is in the correct position, press down firmly. Apply tension if the application is to coil wrap. Best results are Achieved when used at room temperature.\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\u003cstrong\u003eManufacturer Part Number: PACROLL250\u003c\/strong\u003e","brand":"PSP","offers":[{"title":"Default Title","offer_id":58637499433334,"sku":"T1912","price":29.16,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1078\/5560\/files\/Anti-Chafe-Tape_ce3c0f06-0130-44f4-89a2-193ee4ae8569.png?v=1788855742"},{"product_id":"pacroll130","title":"PSP Anti-Chafe Tape 50mm x 3m","description":"\u003cp\u003ePrevent damage to gel coat, paint and varnish work and reduce friction on areas of contact with sails, ropes and blocks. A tough low friction clear film for lamination to high wear areas.\u003c\/p\u003e\n\u003cp\u003eRetail Sizes:\u003cbr\u003e\n130 micron thickness: 50mm x 3m\u003cbr\u003e\n250 micron thickness: 50mm x 2m\u003c\/p\u003e\n\u003cp\u003eTrade Sizes:\u003cbr\u003e\n50mm x 16.5m\u003cbr\u003e\n75mm x 16.5m\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirections for use:\u003c\/strong\u003e\u003cbr\u003e\nIf the product has a backing paper or film, remove this before use. Ensure the surface is clean and dry. Once tape is in the correct position, press down firmly. Apply tension if the application is to coil wrap. Best results are Achieved when used at room temperature.\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\u003cstrong\u003eManufacturer Part Number: PACROLL130\u003c\/strong\u003e","brand":"PSP","offers":[{"title":"Default Title","offer_id":58637499531638,"sku":"T1911","price":29.16,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1078\/5560\/files\/Anti-Chafe-Tape_2ac9786f-5c1a-4c76-a23e-f41886ba8258.png?v=1788855743"},{"product_id":"bac5016130","title":"PSP Anti-Chafe Tape 130 micron 50mm x 16.5m","description":"\u003cp\u003ePrevent damage to gel coat, paint and varnish work and reduce friction on areas of contact with sails, ropes and blocks. A tough low friction clear film for lamination to high wear areas.\u003c\/p\u003e\n\u003cp\u003eRetail Sizes:\u003cbr\u003e\n130 micron thickness: 50mm x 3m\u003cbr\u003e\n250 micron thickness: 50mm x 2m\u003c\/p\u003e\n\u003cp\u003eTrade Sizes:\u003cbr\u003e\n50mm x 16.5m\u003cbr\u003e\n75mm x 16.5m\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirections for use:\u003c\/strong\u003e\u003cbr\u003e\nIf the product has a backing paper or film, remove this before use. Ensure the surface is clean and dry. Once tape is in the correct position, press down firmly. Apply tension if the application is to coil wrap. Best results are Achieved when used at room temperature.\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\u003cstrong\u003eManufacturer Part Number: BAC5016130\u003c\/strong\u003e","brand":"PSP","offers":[{"title":"Default Title","offer_id":58637499662710,"sku":"T1915","price":87.32,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1078\/5560\/files\/Anti-Chafe-Tape_1d09315b-1189-4ba1-b58f-4dbb09ab0967.png?v=1788855744"},{"product_id":"bac7516130","title":"PSP Anti-Chafe Tape 75mm x 16.5m","description":"\u003cp\u003ePrevent damage to gel coat, paint and varnish work and reduce friction on areas of contact with sails, ropes and blocks. A tough low friction clear film for lamination to high wear areas.\u003c\/p\u003e\n\u003cp\u003eRetail Sizes:\u003cbr\u003e\n130 micron thickness: 50mm x 3m\u003cbr\u003e\n250 micron thickness: 50mm x 2m\u003c\/p\u003e\n\u003cp\u003eTrade Sizes:\u003cbr\u003e\n50mm x 16.5m\u003cbr\u003e\n75mm x 16.5m\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirections for use:\u003c\/strong\u003e\u003cbr\u003e\nIf the product has a backing paper or film, remove this before use. Ensure the surface is clean and dry. Once tape is in the correct position, press down firmly. Apply tension if the application is to coil wrap. Best results are Achieved when used at room temperature.\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\u003cstrong\u003eManufacturer Part Number: BAC7516130\u003c\/strong\u003e","brand":"PSP","offers":[{"title":"Default Title","offer_id":58637499859318,"sku":"T1916","price":128.55,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1078\/5560\/files\/Anti-Chafe-Tape_9e4e19f6-a043-4757-89b8-00349a78dee2.png?v=1788855745"},{"product_id":"p092502020","title":"PSP Hook and Loop Fastener Black","description":"\u003cp\u003eA self-adhesive fastener with a temperature stable adhesive to provide a multitude of quick release fixings in a marine environment. Product either in a roll 25mm x 1m or 40 – 22mm         diameter discs – both available in white and black.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirections for use:\u003c\/strong\u003e\u003cbr\u003e\nIf the product has a backing paper or film, remove this before use. Ensure the surface is clean and dry. Once tape is in the correct position, press down firmly. Apply tension if the application is to coil wrap. Best results are Achieved when used at room temperature.\u003cbr\u003e\n\u0026amp;nbsp:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer Part Number: P092502020\u003c\/strong\u003e\u003c\/p\u003e","brand":"PSP","offers":[{"title":"Default Title","offer_id":58637499924854,"sku":"T1520BK","price":14.81,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1078\/5560\/files\/c6e0e10d-4914-4f49-ae51-f678e0a47906.jpg?v=1788976099"},{"product_id":"p092502010","title":"PSP Hook and Loop Fastener White","description":"\u003cp\u003eA self-adhesive fastener with a temperature stable adhesive to provide a multitude of quick release fixings in a marine environment. Product either in a roll 25mm x 1m or 40 – 22mm         diameter discs – both available in white and black.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirections for use:\u003c\/strong\u003e\u003cbr\u003e\nIf the product has a backing paper or film, remove this before use. Ensure the surface is clean and dry. Once tape is in the correct position, press down firmly. Apply tension if the application is to coil wrap. Best results are Achieved when used at room temperature.\u003cbr\u003e\n\u0026amp;nbsp:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer Part Number: P092502010\u003c\/strong\u003e\u003c\/p\u003e","brand":"PSP","offers":[{"title":"Default Title","offer_id":58637500383606,"sku":"T1520WT","price":14.81,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1078\/5560\/files\/21f36eda-25e5-4dfd-be32-a9561bd666d1.jpg?v=1788976030"},{"product_id":"p111503100","title":"PSP Butyl Grey 15mm x 2mm x 3m","description":"\u003cp\u003e\u003cstrong\u003eNOW AVAILABLE IN RECYCLABLE PACKAGING\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor a waterproof joint when bedding, fixing and securing deck fittings, windows, deck hatches, panelling and many more. Simple to use, supplied on a roll with an easily removed release paper. Position around the edge of product to be fixed, press gently into position, a waterproof bond is achieved when fitting is tightened into place.\u003c\/p\u003e\n\u003cp\u003eSize:\u003cbr\u003e\n15mm x 2mm x 3m\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirections for use:\u003c\/strong\u003e\u003cbr\u003e\nCut to required length and position tape around the perimeter of the fitting. Press lightly into position and remove protective release paper, mould sufficient Butyl around the top of the thread which will penetrate and seal the bolt aperture. Tighten bolts to secure and remove surplus Butyl.\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Part Number: P111503100\u003c\/strong\u003e\u003c\/p\u003e","brand":"PSP","offers":[{"title":"Default Title","offer_id":58637500449142,"sku":"T5000GY","price":14.46,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1078\/5560\/files\/Butyl.png?v=1788855748"},{"product_id":"p172110020-d1","title":"PSP Colour Stripe Double Stripe D1 21mm Black 21mm x 10m","description":"\u003cp\u003e5 different combinations of double and triple striping.\u003c\/p\u003e\n\u003cp\u003eAvailable in all our standard colours.\u003c\/p\u003e\n\u003cp\u003eRef – Total Width\u003cbr\u003e\nD1 – 21mm\u003cbr\u003e\nD3 – 40mm\u003cbr\u003e\nT1 – 19mm\u003cbr\u003e\nT2 – 44mm\u003cbr\u003e\nT3 – 20mm\u003c\/p\u003e\n\u003cp\u003eAvailable in 10m and 50m rolls\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirections to apply all decorative stripes:\u003c\/strong\u003e\u003cbr\u003e\nDo not apply stripes to any newly painted or varnished surface, this must be fully cured before application.\u003cbr\u003e\nEnsure the application surface is clean, dry and free from dust and grease. Peel away the backing paper approximately 5cm and position the stripe at the start of the desired line. Unwind and apply to the hull in about 25cm lengths peeling away the backing paper as you do so. As you position the tape, apply gentle pressure to remove any creases and air bubbles. At this stage, it is possible to lift and reposition the stripe taking care not to stretch the tape. Carefully cut each end to the required length using a sharp knife and cutting away from the hull by taking the stripe to the blade. Use a soft cloth to firmly rub over the stripe to ensure a good bond and again, remove any remaining air bubbles. To finish, slowly remove the oversize carrier film where applied.\u003cbr\u003e\n \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer Part Number: P172110020-D1\u003c\/strong\u003e\u003c\/p\u003e","brand":"PSP","offers":[{"title":"Default Title","offer_id":58637500514678,"sku":"TD2110BK","price":17.94,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1078\/5560\/files\/b53bcd05-66c7-4a2c-9071-9e608e631145.jpg?v=1789052143"},{"product_id":"p172110041-d1","title":"PSP Colour Stripe Double Stripe D1 21mm Dark Blue 21mm x 10m","description":"\u003cp\u003e5 different combinations of double and triple striping.\u003c\/p\u003e\n\u003cp\u003eAvailable in all our standard colours.\u003c\/p\u003e\n\u003cp\u003eRef – Total Width\u003cbr\u003e\nD1 – 21mm\u003cbr\u003e\nD3 – 40mm\u003cbr\u003e\nT1 – 19mm\u003cbr\u003e\nT2 – 44mm\u003cbr\u003e\nT3 – 20mm\u003c\/p\u003e\n\u003cp\u003eAvailable in 10m and 50m rolls\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirections to apply all decorative stripes:\u003c\/strong\u003e\u003cbr\u003e\nDo not apply stripes to any newly painted or varnished surface, this must be fully cured before application.\u003cbr\u003e\nEnsure the application surface is clean, dry and free from dust and grease. Peel away the backing paper approximately 5cm and position the stripe at the start of the desired line. Unwind and apply to the hull in about 25cm lengths peeling away the backing paper as you do so. As you position the tape, apply gentle pressure to remove any creases and air bubbles. At this stage, it is possible to lift and reposition the stripe taking care not to stretch the tape. Carefully cut each end to the required length using a sharp knife and cutting away from the hull by taking the stripe to the blade. Use a soft cloth to firmly rub over the stripe to ensure a good bond and again, remove any remaining air bubbles. To finish, slowly remove the oversize carrier film where applied.\u003cbr\u003e\n \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer Part Number: P172110041-D1\u003c\/strong\u003e\u003c\/p\u003e","brand":"PSP","offers":[{"title":"Default Title","offer_id":58637500645750,"sku":"TD2110DB","price":17.94,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1078\/5560\/files\/4c8207b0-5508-4e93-ab12-68ff0f1a271a.jpg?v=1789051831"},{"product_id":"p172110043-d1","title":"PSP Colour Stripe Double Stripe D1 21mm Light Blue 21mm x 10m","description":"\u003cp\u003e5 different combinations of double and triple striping.\u003c\/p\u003e\n\u003cp\u003eAvailable in all our standard colours.\u003c\/p\u003e\n\u003cp\u003eRef – Total Width\u003cbr\u003e\nD1 – 21mm\u003cbr\u003e\nD3 – 40mm\u003cbr\u003e\nT1 – 19mm\u003cbr\u003e\nT2 – 44mm\u003cbr\u003e\nT3 – 20mm\u003c\/p\u003e\n\u003cp\u003eAvailable in 10m and 50m rolls\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirections to apply all decorative stripes:\u003c\/strong\u003e\u003cbr\u003e\nDo not apply stripes to any newly painted or varnished surface, this must be fully cured before application.\u003cbr\u003e\nEnsure the application surface is clean, dry and free from dust and grease. Peel away the backing paper approximately 5cm and position the stripe at the start of the desired line. Unwind and apply to the hull in about 25cm lengths peeling away the backing paper as you do so. As you position the tape, apply gentle pressure to remove any creases and air bubbles. At this stage, it is possible to lift and reposition the stripe taking care not to stretch the tape. Carefully cut each end to the required length using a sharp knife and cutting away from the hull by taking the stripe to the blade. Use a soft cloth to firmly rub over the stripe to ensure a good bond and again, remove any remaining air bubbles. To finish, slowly remove the oversize carrier film where applied.\u003cbr\u003e\n \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer Part Number: P172110043-D1\u003c\/strong\u003e\u003c\/p\u003e","brand":"PSP","offers":[{"title":"Default Title","offer_id":58637500940662,"sku":"TD2110LB","price":17.94,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1078\/5560\/files\/684ebfe9-f204-4b0e-a465-b6bba3c404cb.jpg?v=1789051712"},{"product_id":"p172110070-d1","title":"PSP Colour Stripe Double Stripe D1 21mm Orange 21mm x 10m","description":"\u003cp\u003e5 different combinations of double and triple striping.\u003c\/p\u003e\n\u003cp\u003eAvailable in all our standard colours.\u003c\/p\u003e\n\u003cp\u003eRef – Total Width\u003cbr\u003e\nD1 – 21mm\u003cbr\u003e\nD3 – 40mm\u003cbr\u003e\nT1 – 19mm\u003cbr\u003e\nT2 – 44mm\u003cbr\u003e\nT3 – 20mm\u003c\/p\u003e\n\u003cp\u003eAvailable in 10m and 50m rolls\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirections to apply all decorative stripes:\u003c\/strong\u003e\u003cbr\u003e\nDo not apply stripes to any newly painted or varnished surface, this must be fully cured before application.\u003cbr\u003e\nEnsure the application surface is clean, dry and free from dust and grease. Peel away the backing paper approximately 5cm and position the stripe at the start of the desired line. Unwind and apply to the hull in about 25cm lengths peeling away the backing paper as you do so. As you position the tape, apply gentle pressure to remove any creases and air bubbles. At this stage, it is possible to lift and reposition the stripe taking care not to stretch the tape. Carefully cut each end to the required length using a sharp knife and cutting away from the hull by taking the stripe to the blade. Use a soft cloth to firmly rub over the stripe to ensure a good bond and again, remove any remaining air bubbles. To finish, slowly remove the oversize carrier film where applied.\u003cbr\u003e\n \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer Part Number: P172110070-D1\u003c\/strong\u003e\u003c\/p\u003e","brand":"PSP","offers":[{"title":"Default Title","offer_id":58637501006198,"sku":"TD2110OR","price":17.94,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1078\/5560\/files\/b54dca0d-635e-49e2-bd6b-344c95225ce8.jpg?v=1789051640"},{"product_id":"p172110050-d1","title":"PSP Colour Stripe Double Stripe D1 21mm Sea Green 21mm x 10m","description":"\u003cp\u003e5 different combinations of double and triple striping.\u003c\/p\u003e\n\u003cp\u003eAvailable in all our standard colours.\u003c\/p\u003e\n\u003cp\u003eRef – Total Width\u003cbr\u003e\nD1 – 21mm\u003cbr\u003e\nD3 – 40mm\u003cbr\u003e\nT1 – 19mm\u003cbr\u003e\nT2 – 44mm\u003cbr\u003e\nT3 – 20mm\u003c\/p\u003e\n\u003cp\u003eAvailable in 10m and 50m rolls\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirections to apply all decorative stripes:\u003c\/strong\u003e\u003cbr\u003e\nDo not apply stripes to any newly painted or varnished surface, this must be fully cured before application.\u003cbr\u003e\nEnsure the application surface is clean, dry and free from dust and grease. Peel away the backing paper approximately 5cm and position the stripe at the start of the desired line. Unwind and apply to the hull in about 25cm lengths peeling away the backing paper as you do so. As you position the tape, apply gentle pressure to remove any creases and air bubbles. At this stage, it is possible to lift and reposition the stripe taking care not to stretch the tape. Carefully cut each end to the required length using a sharp knife and cutting away from the hull by taking the stripe to the blade. Use a soft cloth to firmly rub over the stripe to ensure a good bond and again, remove any remaining air bubbles. To finish, slowly remove the oversize carrier film where applied.\u003cbr\u003e\n \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer Part Number: P172110050-D1\u003c\/strong\u003e\u003c\/p\u003e","brand":"PSP","offers":[{"title":"Default Title","offer_id":58637501170038,"sku":"TD2110GN","price":17.94,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1078\/5560\/files\/a4e8253d-f544-4d7a-bd5a-cd8a2346ee54.jpg?v=1789051512"},{"product_id":"p172110060-d1","title":"PSP Colour Stripe Double Stripe D1 21mm Yellow 21mm x 10m","description":"\u003cp\u003e5 different combinations of double and triple striping.\u003c\/p\u003e\n\u003cp\u003eAvailable in all our standard colours.\u003c\/p\u003e\n\u003cp\u003eRef – Total Width\u003cbr\u003e\nD1 – 21mm\u003cbr\u003e\nD3 – 40mm\u003cbr\u003e\nT1 – 19mm\u003cbr\u003e\nT2 – 44mm\u003cbr\u003e\nT3 – 20mm\u003c\/p\u003e\n\u003cp\u003eAvailable in 10m and 50m rolls\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirections to apply all decorative stripes:\u003c\/strong\u003e\u003cbr\u003e\nDo not apply stripes to any newly painted or varnished surface, this must be fully cured before application.\u003cbr\u003e\nEnsure the application surface is clean, dry and free from dust and grease. Peel away the backing paper approximately 5cm and position the stripe at the start of the desired line. Unwind and apply to the hull in about 25cm lengths peeling away the backing paper as you do so. As you position the tape, apply gentle pressure to remove any creases and air bubbles. At this stage, it is possible to lift and reposition the stripe taking care not to stretch the tape. Carefully cut each end to the required length using a sharp knife and cutting away from the hull by taking the stripe to the blade. Use a soft cloth to firmly rub over the stripe to ensure a good bond and again, remove any remaining air bubbles. To finish, slowly remove the oversize carrier film where applied.\u003cbr\u003e\n \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer Part Number: P172110060-D1\u003c\/strong\u003e\u003c\/p\u003e","brand":"PSP","offers":[{"title":"Default Title","offer_id":58637501497718,"sku":"TD2110YE","price":17.94,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1078\/5560\/files\/b0d42fc6-f904-482f-b32a-da458cf11ca1.jpg?v=1789051220"},{"product_id":"b172150041-d1","title":"PSP Colour Stripe Double Stripe D1 21mm Dark Blue 21mm x 50m","description":"\u003cp\u003e5 different combinations of double and triple striping.\u003c\/p\u003e\n\u003cp\u003eAvailable in all our standard colours.\u003c\/p\u003e\n\u003cp\u003eRef – Total Width\u003cbr\u003e\nD1 – 21mm\u003cbr\u003e\nD3 – 40mm\u003cbr\u003e\nT1 – 19mm\u003cbr\u003e\nT2 – 44mm\u003cbr\u003e\nT3 – 20mm\u003c\/p\u003e\n\u003cp\u003eAvailable in 10m and 50m rolls\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirections to apply all decorative stripes:\u003c\/strong\u003e\u003cbr\u003e\nDo not apply stripes to any newly painted or varnished surface, this must be fully cured before application.\u003cbr\u003e\nEnsure the application surface is clean, dry and free from dust and grease. Peel away the backing paper approximately 5cm and position the stripe at the start of the desired line. Unwind and apply to the hull in about 25cm lengths peeling away the backing paper as you do so. As you position the tape, apply gentle pressure to remove any creases and air bubbles. At this stage, it is possible to lift and reposition the stripe taking care not to stretch the tape. Carefully cut each end to the required length using a sharp knife and cutting away from the hull by taking the stripe to the blade. Use a soft cloth to firmly rub over the stripe to ensure a good bond and again, remove any remaining air bubbles. To finish, slowly remove the oversize carrier film where applied.\u003cbr\u003e\n \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer Part Number: B172150041-D1\u003c\/strong\u003e\u003c\/p\u003e","brand":"PSP","offers":[{"title":"Default Title","offer_id":58637501661558,"sku":"TD2150DB","price":60.31,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1078\/5560\/files\/4c8207b0-5508-4e93-ab12-68ff0f1a271a.jpg?v=1789051831"},{"product_id":"b172150092-d1","title":"PSP Colour Stripe Double Stripe D1 21mm Gold 21mm x 50m","description":"\u003cp\u003e5 different combinations of double and triple striping.\u003c\/p\u003e\n\u003cp\u003eAvailable in all our standard colours.\u003c\/p\u003e\n\u003cp\u003eRef – Total Width\u003cbr\u003e\nD1 – 21mm\u003cbr\u003e\nD3 – 40mm\u003cbr\u003e\nT1 – 19mm\u003cbr\u003e\nT2 – 44mm\u003cbr\u003e\nT3 – 20mm\u003c\/p\u003e\n\u003cp\u003eAvailable in 10m and 50m rolls\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirections to apply all decorative stripes:\u003c\/strong\u003e\u003cbr\u003e\nDo not apply stripes to any newly painted or varnished surface, this must be fully cured before application.\u003cbr\u003e\nEnsure the application surface is clean, dry and free from dust and grease. Peel away the backing paper approximately 5cm and position the stripe at the start of the desired line. Unwind and apply to the hull in about 25cm lengths peeling away the backing paper as you do so. As you position the tape, apply gentle pressure to remove any creases and air bubbles. At this stage, it is possible to lift and reposition the stripe taking care not to stretch the tape. Carefully cut each end to the required length using a sharp knife and cutting away from the hull by taking the stripe to the blade. Use a soft cloth to firmly rub over the stripe to ensure a good bond and again, remove any remaining air bubbles. To finish, slowly remove the oversize carrier film where applied.\u003cbr\u003e\n \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer Part Number: B172150092-D1\u003c\/strong\u003e\u003c\/p\u003e","brand":"PSP","offers":[{"title":"Default Title","offer_id":58637501792630,"sku":"TD2150GD","price":60.31,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1078\/5560\/files\/0a4f744f-ea50-4265-8bfd-37010d4abafb.jpg?v=1789051786"},{"product_id":"b172150043-d1","title":"PSP Colour Stripe Double Stripe D1 21mm Light Blue 21mm x 50m","description":"\u003cp\u003e5 different combinations of double and triple striping.\u003c\/p\u003e\n\u003cp\u003eAvailable in all our standard colours.\u003c\/p\u003e\n\u003cp\u003eRef – Total Width\u003cbr\u003e\nD1 – 21mm\u003cbr\u003e\nD3 – 40mm\u003cbr\u003e\nT1 – 19mm\u003cbr\u003e\nT2 – 44mm\u003cbr\u003e\nT3 – 20mm\u003c\/p\u003e\n\u003cp\u003eAvailable in 10m and 50m rolls\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirections to apply all decorative stripes:\u003c\/strong\u003e\u003cbr\u003e\nDo not apply stripes to any newly painted or varnished surface, this must be fully cured before application.\u003cbr\u003e\nEnsure the application surface is clean, dry and free from dust and grease. Peel away the backing paper approximately 5cm and position the stripe at the start of the desired line. Unwind and apply to the hull in about 25cm lengths peeling away the backing paper as you do so. As you position the tape, apply gentle pressure to remove any creases and air bubbles. At this stage, it is possible to lift and reposition the stripe taking care not to stretch the tape. Carefully cut each end to the required length using a sharp knife and cutting away from the hull by taking the stripe to the blade. Use a soft cloth to firmly rub over the stripe to ensure a good bond and again, remove any remaining air bubbles. To finish, slowly remove the oversize carrier film where applied.\u003cbr\u003e\n \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer Part Number: B172150043-D1\u003c\/strong\u003e\u003c\/p\u003e","brand":"PSP","offers":[{"title":"Default Title","offer_id":58637501956470,"sku":"TD2150LB","price":60.31,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1078\/5560\/files\/684ebfe9-f204-4b0e-a465-b6bba3c404cb.jpg?v=1789051712"},{"product_id":"b172150042-d1","title":"PSP Colour Stripe Double Stripe D1 21mm Mid Blue 21mm x 50m","description":"\u003cp\u003e5 different combinations of double and triple striping.\u003c\/p\u003e\n\u003cp\u003eAvailable in all our standard colours.\u003c\/p\u003e\n\u003cp\u003eRef – Total Width\u003cbr\u003e\nD1 – 21mm\u003cbr\u003e\nD3 – 40mm\u003cbr\u003e\nT1 – 19mm\u003cbr\u003e\nT2 – 44mm\u003cbr\u003e\nT3 – 20mm\u003c\/p\u003e\n\u003cp\u003eAvailable in 10m and 50m rolls\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirections to apply all decorative stripes:\u003c\/strong\u003e\u003cbr\u003e\nDo not apply stripes to any newly painted or varnished surface, this must be fully cured before application.\u003cbr\u003e\nEnsure the application surface is clean, dry and free from dust and grease. Peel away the backing paper approximately 5cm and position the stripe at the start of the desired line. Unwind and apply to the hull in about 25cm lengths peeling away the backing paper as you do so. As you position the tape, apply gentle pressure to remove any creases and air bubbles. At this stage, it is possible to lift and reposition the stripe taking care not to stretch the tape. Carefully cut each end to the required length using a sharp knife and cutting away from the hull by taking the stripe to the blade. Use a soft cloth to firmly rub over the stripe to ensure a good bond and again, remove any remaining air bubbles. To finish, slowly remove the oversize carrier film where applied.\u003cbr\u003e\n \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer Part Number: B172150042-D1\u003c\/strong\u003e\u003c\/p\u003e","brand":"PSP","offers":[{"title":"Default Title","offer_id":58637502120310,"sku":"TD2150MB","price":60.31,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1078\/5560\/files\/cc02d711-cfac-46ea-8301-f958a68e2e2a.jpg?v=1789043982"},{"product_id":"b172150070-d1","title":"PSP Colour Stripe Double Stripe D1 21mm Orange 21mm x 50m","description":"\u003cp\u003e5 different combinations of double and triple striping.\u003c\/p\u003e\n\u003cp\u003eAvailable in all our standard colours.\u003c\/p\u003e\n\u003cp\u003eRef – Total Width\u003cbr\u003e\nD1 – 21mm\u003cbr\u003e\nD3 – 40mm\u003cbr\u003e\nT1 – 19mm\u003cbr\u003e\nT2 – 44mm\u003cbr\u003e\nT3 – 20mm\u003c\/p\u003e\n\u003cp\u003eAvailable in 10m and 50m rolls\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirections to apply all decorative stripes:\u003c\/strong\u003e\u003cbr\u003e\nDo not apply stripes to any newly painted or varnished surface, this must be fully cured before application.\u003cbr\u003e\nEnsure the application surface is clean, dry and free from dust and grease. Peel away the backing paper approximately 5cm and position the stripe at the start of the desired line. Unwind and apply to the hull in about 25cm lengths peeling away the backing paper as you do so. As you position the tape, apply gentle pressure to remove any creases and air bubbles. At this stage, it is possible to lift and reposition the stripe taking care not to stretch the tape. Carefully cut each end to the required length using a sharp knife and cutting away from the hull by taking the stripe to the blade. Use a soft cloth to firmly rub over the stripe to ensure a good bond and again, remove any remaining air bubbles. To finish, slowly remove the oversize carrier film where applied.\u003cbr\u003e\n \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer Part Number: B172150070-D1\u003c\/strong\u003e\u003c\/p\u003e","brand":"PSP","offers":[{"title":"Default Title","offer_id":58637502415222,"sku":"TD2150OR","price":60.31,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1078\/5560\/files\/b54dca0d-635e-49e2-bd6b-344c95225ce8.jpg?v=1789051640"},{"product_id":"b172150030-d1","title":"PSP Colour Stripe Double Stripe D1 21mm Red 21mm x 50m","description":"\u003cp\u003e5 different combinations of double and triple striping.\u003c\/p\u003e\n\u003cp\u003eAvailable in all our standard colours.\u003c\/p\u003e\n\u003cp\u003eRef – Total Width\u003cbr\u003e\nD1 – 21mm\u003cbr\u003e\nD3 – 40mm\u003cbr\u003e\nT1 – 19mm\u003cbr\u003e\nT2 – 44mm\u003cbr\u003e\nT3 – 20mm\u003c\/p\u003e\n\u003cp\u003eAvailable in 10m and 50m rolls\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirections to apply all decorative stripes:\u003c\/strong\u003e\u003cbr\u003e\nDo not apply stripes to any newly painted or varnished surface, this must be fully cured before application.\u003cbr\u003e\nEnsure the application surface is clean, dry and free from dust and grease. Peel away the backing paper approximately 5cm and position the stripe at the start of the desired line. Unwind and apply to the hull in about 25cm lengths peeling away the backing paper as you do so. As you position the tape, apply gentle pressure to remove any creases and air bubbles. At this stage, it is possible to lift and reposition the stripe taking care not to stretch the tape. Carefully cut each end to the required length using a sharp knife and cutting away from the hull by taking the stripe to the blade. Use a soft cloth to firmly rub over the stripe to ensure a good bond and again, remove any remaining air bubbles. To finish, slowly remove the oversize carrier film where applied.\u003cbr\u003e\n \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer Part Number: B172150030-D1\u003c\/strong\u003e\u003c\/p\u003e","brand":"PSP","offers":[{"title":"Default Title","offer_id":58637502677366,"sku":"TD2150RD","price":60.31,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1078\/5560\/files\/433e3ec8-a658-4fca-8acb-795b3655eec0.jpg?v=1789051594"},{"product_id":"b172150050-d1","title":"PSP Colour Stripe Double Stripe D1 21mm Sea Green 21mm x 50m","description":"\u003cp\u003e5 different combinations of double and triple striping.\u003c\/p\u003e\n\u003cp\u003eAvailable in all our standard colours.\u003c\/p\u003e\n\u003cp\u003eRef – Total Width\u003cbr\u003e\nD1 – 21mm\u003cbr\u003e\nD3 – 40mm\u003cbr\u003e\nT1 – 19mm\u003cbr\u003e\nT2 – 44mm\u003cbr\u003e\nT3 – 20mm\u003c\/p\u003e\n\u003cp\u003eAvailable in 10m and 50m rolls\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirections to apply all decorative stripes:\u003c\/strong\u003e\u003cbr\u003e\nDo not apply stripes to any newly painted or varnished surface, this must be fully cured before application.\u003cbr\u003e\nEnsure the application surface is clean, dry and free from dust and grease. Peel away the backing paper approximately 5cm and position the stripe at the start of the desired line. Unwind and apply to the hull in about 25cm lengths peeling away the backing paper as you do so. As you position the tape, apply gentle pressure to remove any creases and air bubbles. At this stage, it is possible to lift and reposition the stripe taking care not to stretch the tape. Carefully cut each end to the required length using a sharp knife and cutting away from the hull by taking the stripe to the blade. Use a soft cloth to firmly rub over the stripe to ensure a good bond and again, remove any remaining air bubbles. To finish, slowly remove the oversize carrier film where applied.\u003cbr\u003e\n \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer Part Number: B172150050-D1\u003c\/strong\u003e\u003c\/p\u003e","brand":"PSP","offers":[{"title":"Default Title","offer_id":58637502808438,"sku":"TD2150GN","price":60.31,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1078\/5560\/files\/a4e8253d-f544-4d7a-bd5a-cd8a2346ee54.jpg?v=1789051512"},{"product_id":"b172150100-d1","title":"PSP Colour Stripe Double Stripe D1 21mm Silver 21mm x 50m","description":"\u003cp\u003e5 different combinations of double and triple striping.\u003c\/p\u003e\n\u003cp\u003eAvailable in all our standard colours.\u003c\/p\u003e\n\u003cp\u003eRef – Total Width\u003cbr\u003e\nD1 – 21mm\u003cbr\u003e\nD3 – 40mm\u003cbr\u003e\nT1 – 19mm\u003cbr\u003e\nT2 – 44mm\u003cbr\u003e\nT3 – 20mm\u003c\/p\u003e\n\u003cp\u003eAvailable in 10m and 50m rolls\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirections to apply all decorative stripes:\u003c\/strong\u003e\u003cbr\u003e\nDo not apply stripes to any newly painted or varnished surface, this must be fully cured before application.\u003cbr\u003e\nEnsure the application surface is clean, dry and free from dust and grease. Peel away the backing paper approximately 5cm and position the stripe at the start of the desired line. Unwind and apply to the hull in about 25cm lengths peeling away the backing paper as you do so. As you position the tape, apply gentle pressure to remove any creases and air bubbles. At this stage, it is possible to lift and reposition the stripe taking care not to stretch the tape. Carefully cut each end to the required length using a sharp knife and cutting away from the hull by taking the stripe to the blade. Use a soft cloth to firmly rub over the stripe to ensure a good bond and again, remove any remaining air bubbles. To finish, slowly remove the oversize carrier film where applied.\u003cbr\u003e\n \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer Part Number: B172150100-D1\u003c\/strong\u003e\u003c\/p\u003e","brand":"PSP","offers":[{"title":"Default Title","offer_id":58637502841206,"sku":"TD2150SV","price":60.31,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1078\/5560\/files\/850eda27-5785-4ad4-815a-18ebb81bd067.jpg?v=1789051471"},{"product_id":"b172150010-d1","title":"PSP Colour Stripe Double Stripe D1 21mm White 21mm x 50m","description":"\u003cp\u003e5 different combinations of double and triple striping.\u003c\/p\u003e\n\u003cp\u003eAvailable in all our standard colours.\u003c\/p\u003e\n\u003cp\u003eRef – Total Width\u003cbr\u003e\nD1 – 21mm\u003cbr\u003e\nD3 – 40mm\u003cbr\u003e\nT1 – 19mm\u003cbr\u003e\nT2 – 44mm\u003cbr\u003e\nT3 – 20mm\u003c\/p\u003e\n\u003cp\u003eAvailable in 10m and 50m rolls\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirections to apply all decorative stripes:\u003c\/strong\u003e\u003cbr\u003e\nDo not apply stripes to any newly painted or varnished surface, this must be fully cured before application.\u003cbr\u003e\nEnsure the application surface is clean, dry and free from dust and grease. Peel away the backing paper approximately 5cm and position the stripe at the start of the desired line. Unwind and apply to the hull in about 25cm lengths peeling away the backing paper as you do so. As you position the tape, apply gentle pressure to remove any creases and air bubbles. At this stage, it is possible to lift and reposition the stripe taking care not to stretch the tape. Carefully cut each end to the required length using a sharp knife and cutting away from the hull by taking the stripe to the blade. Use a soft cloth to firmly rub over the stripe to ensure a good bond and again, remove any remaining air bubbles. To finish, slowly remove the oversize carrier film where applied.\u003cbr\u003e\n \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer Part Number: B172150010-D1\u003c\/strong\u003e\u003c\/p\u003e","brand":"PSP","offers":[{"title":"Default Title","offer_id":58637502939510,"sku":"TD2150WT","price":60.31,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1078\/5560\/files\/22ad987b-be9e-4a82-acd1-8d71f5a02f50.jpg?v=1789051311"},{"product_id":"b172150060-d1","title":"PSP Colour Stripe Double Stripe D1 21mm Yellow 21mm x 50m","description":"\u003cp\u003e5 different combinations of double and triple striping.\u003c\/p\u003e\n\u003cp\u003eAvailable in all our standard colours.\u003c\/p\u003e\n\u003cp\u003eRef – Total Width\u003cbr\u003e\nD1 – 21mm\u003cbr\u003e\nD3 – 40mm\u003cbr\u003e\nT1 – 19mm\u003cbr\u003e\nT2 – 44mm\u003cbr\u003e\nT3 – 20mm\u003c\/p\u003e\n\u003cp\u003eAvailable in 10m and 50m rolls\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirections to apply all decorative stripes:\u003c\/strong\u003e\u003cbr\u003e\nDo not apply stripes to any newly painted or varnished surface, this must be fully cured before application.\u003cbr\u003e\nEnsure the application surface is clean, dry and free from dust and grease. Peel away the backing paper approximately 5cm and position the stripe at the start of the desired line. Unwind and apply to the hull in about 25cm lengths peeling away the backing paper as you do so. As you position the tape, apply gentle pressure to remove any creases and air bubbles. At this stage, it is possible to lift and reposition the stripe taking care not to stretch the tape. Carefully cut each end to the required length using a sharp knife and cutting away from the hull by taking the stripe to the blade. Use a soft cloth to firmly rub over the stripe to ensure a good bond and again, remove any remaining air bubbles. To finish, slowly remove the oversize carrier film where applied.\u003cbr\u003e\n \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer Part Number: B172150060-D1\u003c\/strong\u003e\u003c\/p\u003e","brand":"PSP","offers":[{"title":"Default Title","offer_id":58637503037814,"sku":"TD2150YE","price":60.31,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1078\/5560\/files\/b0d42fc6-f904-482f-b32a-da458cf11ca1.jpg?v=1789051220"},{"product_id":"p174010020-d3","title":"PSP Colour Stripe Double Stripe D3 40mm Black 40mm x 10m","description":"\u003cp\u003e5 different combinations of double and triple striping.\u003c\/p\u003e\n\u003cp\u003eAvailable in all our standard colours.\u003c\/p\u003e\n\u003cp\u003eRef – Total Width\u003cbr\u003e\nD1 – 21mm\u003cbr\u003e\nD3 – 40mm\u003cbr\u003e\nT1 – 19mm\u003cbr\u003e\nT2 – 44mm\u003cbr\u003e\nT3 – 20mm\u003c\/p\u003e\n\u003cp\u003eAvailable in 10m and 50m rolls\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirections to apply all decorative stripes:\u003c\/strong\u003e\u003cbr\u003e\nDo not apply stripes to any newly painted or varnished surface, this must be fully cured before application.\u003cbr\u003e\nEnsure the application surface is clean, dry and free from dust and grease. Peel away the backing paper approximately 5cm and position the stripe at the start of the desired line. Unwind and apply to the hull in about 25cm lengths peeling away the backing paper as you do so. As you position the tape, apply gentle pressure to remove any creases and air bubbles. At this stage, it is possible to lift and reposition the stripe taking care not to stretch the tape. Carefully cut each end to the required length using a sharp knife and cutting away from the hull by taking the stripe to the blade. Use a soft cloth to firmly rub over the stripe to ensure a good bond and again, remove any remaining air bubbles. To finish, slowly remove the oversize carrier film where applied.\u003cbr\u003e\n \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer Part Number: P174010020-D3\u003c\/strong\u003e\u003c\/p\u003e","brand":"PSP","offers":[{"title":"Default Title","offer_id":58637503299958,"sku":"TD4010BK","price":27.27,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1078\/5560\/files\/165c202d-5e19-437e-a148-5eaa1c7f5c4b.jpg?v=1789054319"},{"product_id":"p174010099-d3","title":"PSP Colour Stripe Double Stripe D3 40mm Charcoal 40mm x 10m","description":"\u003cp\u003e5 different combinations of double and triple striping.\u003c\/p\u003e\n\u003cp\u003eAvailable in all our standard colours.\u003c\/p\u003e\n\u003cp\u003eRef – Total Width\u003cbr\u003e\nD1 – 21mm\u003cbr\u003e\nD3 – 40mm\u003cbr\u003e\nT1 – 19mm\u003cbr\u003e\nT2 – 44mm\u003cbr\u003e\nT3 – 20mm\u003c\/p\u003e\n\u003cp\u003eAvailable in 10m and 50m rolls\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirections to apply all decorative stripes:\u003c\/strong\u003e\u003cbr\u003e\nDo not apply stripes to any newly painted or varnished surface, this must be fully cured before application.\u003cbr\u003e\nEnsure the application surface is clean, dry and free from dust and grease. Peel away the backing paper approximately 5cm and position the stripe at the start of the desired line. Unwind and apply to the hull in about 25cm lengths peeling away the backing paper as you do so. As you position the tape, apply gentle pressure to remove any creases and air bubbles. At this stage, it is possible to lift and reposition the stripe taking care not to stretch the tape. Carefully cut each end to the required length using a sharp knife and cutting away from the hull by taking the stripe to the blade. Use a soft cloth to firmly rub over the stripe to ensure a good bond and again, remove any remaining air bubbles. To finish, slowly remove the oversize carrier film where applied.\u003cbr\u003e\n \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer Part Number: P174010099-D3\u003c\/strong\u003e\u003c\/p\u003e","brand":"PSP","offers":[{"title":"Default Title","offer_id":58637503529334,"sku":"TD4010CH","price":27.27,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1078\/5560\/files\/075f64ff-19bc-48b4-b728-32ec7206c4b3.jpg?v=1789054775"},{"product_id":"p174010041-d3","title":"PSP Colour Stripe Double Stripe D3 40mm Dark Blue 40mm x 10m","description":"\u003cp\u003e5 different combinations of double and triple striping.\u003c\/p\u003e\n\u003cp\u003eAvailable in all our standard colours.\u003c\/p\u003e\n\u003cp\u003eRef – Total Width\u003cbr\u003e\nD1 – 21mm\u003cbr\u003e\nD3 – 40mm\u003cbr\u003e\nT1 – 19mm\u003cbr\u003e\nT2 – 44mm\u003cbr\u003e\nT3 – 20mm\u003c\/p\u003e\n\u003cp\u003eAvailable in 10m and 50m rolls\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirections to apply all decorative stripes:\u003c\/strong\u003e\u003cbr\u003e\nDo not apply stripes to any newly painted or varnished surface, this must be fully cured before application.\u003cbr\u003e\nEnsure the application surface is clean, dry and free from dust and grease. Peel away the backing paper approximately 5cm and position the stripe at the start of the desired line. Unwind and apply to the hull in about 25cm lengths peeling away the backing paper as you do so. As you position the tape, apply gentle pressure to remove any creases and air bubbles. At this stage, it is possible to lift and reposition the stripe taking care not to stretch the tape. Carefully cut each end to the required length using a sharp knife and cutting away from the hull by taking the stripe to the blade. Use a soft cloth to firmly rub over the stripe to ensure a good bond and again, remove any remaining air bubbles. To finish, slowly remove the oversize carrier film where applied.\u003cbr\u003e\n \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer Part Number: P174010041-D3\u003c\/strong\u003e\u003c\/p\u003e","brand":"PSP","offers":[{"title":"Default Title","offer_id":58637503594870,"sku":"TD4010DB","price":27.27,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1078\/5560\/files\/f523c4e5-bc1d-41a0-8de6-d4c7620e1f75.jpg?v=1789054370"},{"product_id":"p174010092-d3","title":"PSP Colour Stripe Double Stripe D3 40mm Gold 40mm x 10m","description":"\u003cp\u003e5 different combinations of double and triple striping.\u003c\/p\u003e\n\u003cp\u003eAvailable in all our standard colours.\u003c\/p\u003e\n\u003cp\u003eRef – Total Width\u003cbr\u003e\nD1 – 21mm\u003cbr\u003e\nD3 – 40mm\u003cbr\u003e\nT1 – 19mm\u003cbr\u003e\nT2 – 44mm\u003cbr\u003e\nT3 – 20mm\u003c\/p\u003e\n\u003cp\u003eAvailable in 10m and 50m rolls\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirections to apply all decorative stripes:\u003c\/strong\u003e\u003cbr\u003e\nDo not apply stripes to any newly painted or varnished surface, this must be fully cured before application.\u003cbr\u003e\nEnsure the application surface is clean, dry and free from dust and grease. Peel away the backing paper approximately 5cm and position the stripe at the start of the desired line. Unwind and apply to the hull in about 25cm lengths peeling away the backing paper as you do so. As you position the tape, apply gentle pressure to remove any creases and air bubbles. At this stage, it is possible to lift and reposition the stripe taking care not to stretch the tape. Carefully cut each end to the required length using a sharp knife and cutting away from the hull by taking the stripe to the blade. Use a soft cloth to firmly rub over the stripe to ensure a good bond and again, remove any remaining air bubbles. To finish, slowly remove the oversize carrier film where applied.\u003cbr\u003e\n \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer Part Number: P174010092-D3\u003c\/strong\u003e\u003c\/p\u003e","brand":"PSP","offers":[{"title":"Default Title","offer_id":58637503693174,"sku":"TD4010GD","price":27.27,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1078\/5560\/files\/9ee6b7ba-0b75-4420-87f0-68c5845a6f70.jpg?v=1789054250"},{"product_id":"p174010043-d3","title":"PSP Colour Stripe Double Stripe D3 40mm Light Blue 40mm x 10m","description":"\u003cp\u003e5 different combinations of double and triple striping.\u003c\/p\u003e\n\u003cp\u003eAvailable in all our standard colours.\u003c\/p\u003e\n\u003cp\u003eRef – Total Width\u003cbr\u003e\nD1 – 21mm\u003cbr\u003e\nD3 – 40mm\u003cbr\u003e\nT1 – 19mm\u003cbr\u003e\nT2 – 44mm\u003cbr\u003e\nT3 – 20mm\u003c\/p\u003e\n\u003cp\u003eAvailable in 10m and 50m rolls\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirections to apply all decorative stripes:\u003c\/strong\u003e\u003cbr\u003e\nDo not apply stripes to any newly painted or varnished surface, this must be fully cured before application.\u003cbr\u003e\nEnsure the application surface is clean, dry and free from dust and grease. Peel away the backing paper approximately 5cm and position the stripe at the start of the desired line. Unwind and apply to the hull in about 25cm lengths peeling away the backing paper as you do so. As you position the tape, apply gentle pressure to remove any creases and air bubbles. At this stage, it is possible to lift and reposition the stripe taking care not to stretch the tape. Carefully cut each end to the required length using a sharp knife and cutting away from the hull by taking the stripe to the blade. Use a soft cloth to firmly rub over the stripe to ensure a good bond and again, remove any remaining air bubbles. To finish, slowly remove the oversize carrier film where applied.\u003cbr\u003e\n \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer Part Number: P174010043-D3\u003c\/strong\u003e\u003c\/p\u003e","brand":"PSP","offers":[{"title":"Default Title","offer_id":58637503824246,"sku":"TD4010LB","price":27.27,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1078\/5560\/files\/6207f7fe-a88e-42bd-96f8-93a5493b9c43.jpg?v=1789054194"},{"product_id":"p174010042-d3","title":"PSP Colour Stripe Double Stripe D3 40mm Mid Blue 40mm x 10m","description":"\u003cp\u003e5 different combinations of double and triple striping.\u003c\/p\u003e\n\u003cp\u003eAvailable in all our standard colours.\u003c\/p\u003e\n\u003cp\u003eRef – Total Width\u003cbr\u003e\nD1 – 21mm\u003cbr\u003e\nD3 – 40mm\u003cbr\u003e\nT1 – 19mm\u003cbr\u003e\nT2 – 44mm\u003cbr\u003e\nT3 – 20mm\u003c\/p\u003e\n\u003cp\u003eAvailable in 10m and 50m rolls\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirections to apply all decorative stripes:\u003c\/strong\u003e\u003cbr\u003e\nDo not apply stripes to any newly painted or varnished surface, this must be fully cured before application.\u003cbr\u003e\nEnsure the application surface is clean, dry and free from dust and grease. Peel away the backing paper approximately 5cm and position the stripe at the start of the desired line. Unwind and apply to the hull in about 25cm lengths peeling away the backing paper as you do so. As you position the tape, apply gentle pressure to remove any creases and air bubbles. At this stage, it is possible to lift and reposition the stripe taking care not to stretch the tape. Carefully cut each end to the required length using a sharp knife and cutting away from the hull by taking the stripe to the blade. Use a soft cloth to firmly rub over the stripe to ensure a good bond and again, remove any remaining air bubbles. To finish, slowly remove the oversize carrier film where applied.\u003cbr\u003e\n \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer Part Number: P174010042-D3\u003c\/strong\u003e\u003c\/p\u003e","brand":"PSP","offers":[{"title":"Default Title","offer_id":58637503988086,"sku":"TD4010MB","price":27.27,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1078\/5560\/files\/9d6e4749-0d32-4e7b-8479-088b4fc297e8.jpg?v=1789054140"},{"product_id":"p174010070-d3","title":"PSP Colour Stripe Double Stripe D3 40mm Orange 40mm x 10m","description":"\u003cp\u003e5 different combinations of double and triple striping.\u003c\/p\u003e\n\u003cp\u003eAvailable in all our standard colours.\u003c\/p\u003e\n\u003cp\u003eRef – Total Width\u003cbr\u003e\nD1 – 21mm\u003cbr\u003e\nD3 – 40mm\u003cbr\u003e\nT1 – 19mm\u003cbr\u003e\nT2 – 44mm\u003cbr\u003e\nT3 – 20mm\u003c\/p\u003e\n\u003cp\u003eAvailable in 10m and 50m rolls\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirections to apply all decorative stripes:\u003c\/strong\u003e\u003cbr\u003e\nDo not apply stripes to any newly painted or varnished surface, this must be fully cured before application.\u003cbr\u003e\nEnsure the application surface is clean, dry and free from dust and grease. Peel away the backing paper approximately 5cm and position the stripe at the start of the desired line. Unwind and apply to the hull in about 25cm lengths peeling away the backing paper as you do so. As you position the tape, apply gentle pressure to remove any creases and air bubbles. At this stage, it is possible to lift and reposition the stripe taking care not to stretch the tape. Carefully cut each end to the required length using a sharp knife and cutting away from the hull by taking the stripe to the blade. Use a soft cloth to firmly rub over the stripe to ensure a good bond and again, remove any remaining air bubbles. To finish, slowly remove the oversize carrier film where applied.\u003cbr\u003e\n \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer Part Number: P174010070-D3\u003c\/strong\u003e\u003c\/p\u003e","brand":"PSP","offers":[{"title":"Default Title","offer_id":58637505036662,"sku":"TD4010OR","price":27.27,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1078\/5560\/files\/b5246d8c-b870-43dc-a485-6f0aff138d27.jpg?v=1789054085"},{"product_id":"p174010030-d3","title":"PSP Colour Stripe Double Stripe D3 40mm Red 40mm x 10m","description":"\u003cp\u003e5 different combinations of double and triple striping.\u003c\/p\u003e\n\u003cp\u003eAvailable in all our standard colours.\u003c\/p\u003e\n\u003cp\u003eRef – Total Width\u003cbr\u003e\nD1 – 21mm\u003cbr\u003e\nD3 – 40mm\u003cbr\u003e\nT1 – 19mm\u003cbr\u003e\nT2 – 44mm\u003cbr\u003e\nT3 – 20mm\u003c\/p\u003e\n\u003cp\u003eAvailable in 10m and 50m rolls\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirections to apply all decorative stripes:\u003c\/strong\u003e\u003cbr\u003e\nDo not apply stripes to any newly painted or varnished surface, this must be fully cured before application.\u003cbr\u003e\nEnsure the application surface is clean, dry and free from dust and grease. Peel away the backing paper approximately 5cm and position the stripe at the start of the desired line. Unwind and apply to the hull in about 25cm lengths peeling away the backing paper as you do so. As you position the tape, apply gentle pressure to remove any creases and air bubbles. At this stage, it is possible to lift and reposition the stripe taking care not to stretch the tape. Carefully cut each end to the required length using a sharp knife and cutting away from the hull by taking the stripe to the blade. Use a soft cloth to firmly rub over the stripe to ensure a good bond and again, remove any remaining air bubbles. To finish, slowly remove the oversize carrier film where applied.\u003cbr\u003e\n \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer Part Number: P174010030-D3\u003c\/strong\u003e\u003c\/p\u003e","brand":"PSP","offers":[{"title":"Default Title","offer_id":58637505200502,"sku":"TD4010RD","price":27.27,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1078\/5560\/files\/d43d29f8-de52-43e5-88a4-fbdec0bbf3e6.jpg?v=1789054027"},{"product_id":"p174010050-d3","title":"PSP Colour Stripe Double Stripe D3 40mm Sea Green 40mm x 10m","description":"\u003cp\u003e5 different combinations of double and triple striping.\u003c\/p\u003e\n\u003cp\u003eAvailable in all our standard colours.\u003c\/p\u003e\n\u003cp\u003eRef – Total Width\u003cbr\u003e\nD1 – 21mm\u003cbr\u003e\nD3 – 40mm\u003cbr\u003e\nT1 – 19mm\u003cbr\u003e\nT2 – 44mm\u003cbr\u003e\nT3 – 20mm\u003c\/p\u003e\n\u003cp\u003eAvailable in 10m and 50m rolls\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirections to apply all decorative stripes:\u003c\/strong\u003e\u003cbr\u003e\nDo not apply stripes to any newly painted or varnished surface, this must be fully cured before application.\u003cbr\u003e\nEnsure the application surface is clean, dry and free from dust and grease. Peel away the backing paper approximately 5cm and position the stripe at the start of the desired line. Unwind and apply to the hull in about 25cm lengths peeling away the backing paper as you do so. As you position the tape, apply gentle pressure to remove any creases and air bubbles. At this stage, it is possible to lift and reposition the stripe taking care not to stretch the tape. Carefully cut each end to the required length using a sharp knife and cutting away from the hull by taking the stripe to the blade. Use a soft cloth to firmly rub over the stripe to ensure a good bond and again, remove any remaining air bubbles. To finish, slowly remove the oversize carrier film where applied.\u003cbr\u003e\n \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer Part Number: P174010050-D3\u003c\/strong\u003e\u003c\/p\u003e","brand":"PSP","offers":[{"title":"Default Title","offer_id":58637506019702,"sku":"TD4010GN","price":27.27,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1078\/5560\/files\/655ca5ee-b818-4210-a5d9-d37148f7923a.jpg?v=1789053977"},{"product_id":"p174010100-d3","title":"PSP Colour Stripe Double Stripe D3 40mm Silver 40mm x 10m","description":"\u003cp\u003e5 different combinations of double and triple striping.\u003c\/p\u003e\n\u003cp\u003eAvailable in all our standard colours.\u003c\/p\u003e\n\u003cp\u003eRef – Total Width\u003cbr\u003e\nD1 – 21mm\u003cbr\u003e\nD3 – 40mm\u003cbr\u003e\nT1 – 19mm\u003cbr\u003e\nT2 – 44mm\u003cbr\u003e\nT3 – 20mm\u003c\/p\u003e\n\u003cp\u003eAvailable in 10m and 50m rolls\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirections to apply all decorative stripes:\u003c\/strong\u003e\u003cbr\u003e\nDo not apply stripes to any newly painted or varnished surface, this must be fully cured before application.\u003cbr\u003e\nEnsure the application surface is clean, dry and free from dust and grease. Peel away the backing paper approximately 5cm and position the stripe at the start of the desired line. Unwind and apply to the hull in about 25cm lengths peeling away the backing paper as you do so. As you position the tape, apply gentle pressure to remove any creases and air bubbles. At this stage, it is possible to lift and reposition the stripe taking care not to stretch the tape. Carefully cut each end to the required length using a sharp knife and cutting away from the hull by taking the stripe to the blade. Use a soft cloth to firmly rub over the stripe to ensure a good bond and again, remove any remaining air bubbles. To finish, slowly remove the oversize carrier film where applied.\u003cbr\u003e\n \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer Part Number: P174010100-D3\u003c\/strong\u003e\u003c\/p\u003e","brand":"PSP","offers":[{"title":"Default Title","offer_id":58637506281846,"sku":"TD4010SV","price":27.27,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1078\/5560\/files\/803dcd07-ec4b-428e-8c36-aba6ac4bc14d.jpg?v=1789053319"},{"product_id":"p174010060-d3","title":"PSP Colour Stripe Double Stripe D3 40mm Yellow 40mm x 10m","description":"\u003cp\u003e5 different combinations of double and triple striping.\u003c\/p\u003e\n\u003cp\u003eAvailable in all our standard colours.\u003c\/p\u003e\n\u003cp\u003eRef – Total Width\u003cbr\u003e\nD1 – 21mm\u003cbr\u003e\nD3 – 40mm\u003cbr\u003e\nT1 – 19mm\u003cbr\u003e\nT2 – 44mm\u003cbr\u003e\nT3 – 20mm\u003c\/p\u003e\n\u003cp\u003eAvailable in 10m and 50m rolls\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirections to apply all decorative stripes:\u003c\/strong\u003e\u003cbr\u003e\nDo not apply stripes to any newly painted or varnished surface, this must be fully cured before application.\u003cbr\u003e\nEnsure the application surface is clean, dry and free from dust and grease. Peel away the backing paper approximately 5cm and position the stripe at the start of the desired line. Unwind and apply to the hull in about 25cm lengths peeling away the backing paper as you do so. As you position the tape, apply gentle pressure to remove any creases and air bubbles. At this stage, it is possible to lift and reposition the stripe taking care not to stretch the tape. Carefully cut each end to the required length using a sharp knife and cutting away from the hull by taking the stripe to the blade. Use a soft cloth to firmly rub over the stripe to ensure a good bond and again, remove any remaining air bubbles. To finish, slowly remove the oversize carrier film where applied.\u003cbr\u003e\n \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer Part Number: P174010060-D3\u003c\/strong\u003e\u003c\/p\u003e","brand":"PSP","offers":[{"title":"Default Title","offer_id":58637506347382,"sku":"TD4010YE","price":27.27,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1078\/5560\/files\/0870f777-00fc-4bf8-b69a-39799b037135.jpg?v=1789053849"},{"product_id":"b174050020-d3","title":"PSP Colour Stripe Double Stripe D3 40mm Black 40mm x 50m","description":"\u003cp\u003e5 different combinations of double and triple striping.\u003c\/p\u003e\n\u003cp\u003eAvailable in all our standard colours.\u003c\/p\u003e\n\u003cp\u003eRef – Total Width\u003cbr\u003e\nD1 – 21mm\u003cbr\u003e\nD3 – 40mm\u003cbr\u003e\nT1 – 19mm\u003cbr\u003e\nT2 – 44mm\u003cbr\u003e\nT3 – 20mm\u003c\/p\u003e\n\u003cp\u003eAvailable in 10m and 50m rolls\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirections to apply all decorative stripes:\u003c\/strong\u003e\u003cbr\u003e\nDo not apply stripes to any newly painted or varnished surface, this must be fully cured before application.\u003cbr\u003e\nEnsure the application surface is clean, dry and free from dust and grease. Peel away the backing paper approximately 5cm and position the stripe at the start of the desired line. Unwind and apply to the hull in about 25cm lengths peeling away the backing paper as you do so. As you position the tape, apply gentle pressure to remove any creases and air bubbles. At this stage, it is possible to lift and reposition the stripe taking care not to stretch the tape. Carefully cut each end to the required length using a sharp knife and cutting away from the hull by taking the stripe to the blade. Use a soft cloth to firmly rub over the stripe to ensure a good bond and again, remove any remaining air bubbles. To finish, slowly remove the oversize carrier film where applied.\u003cbr\u003e\n \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer Part Number: B174050020-D3\u003c\/strong\u003e\u003c\/p\u003e","brand":"PSP","offers":[{"title":"Default Title","offer_id":58637506380150,"sku":"TD4050BK","price":102.12,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1078\/5560\/files\/165c202d-5e19-437e-a148-5eaa1c7f5c4b.jpg?v=1789054319"},{"product_id":"b174050092-d3","title":"PSP Colour Stripe Double Stripe D3 40mm Gold 40mm x 50m","description":"\u003cp\u003e5 different combinations of double and triple striping.\u003c\/p\u003e\n\u003cp\u003eAvailable in all our standard colours.\u003c\/p\u003e\n\u003cp\u003eRef – Total Width\u003cbr\u003e\nD1 – 21mm\u003cbr\u003e\nD3 – 40mm\u003cbr\u003e\nT1 – 19mm\u003cbr\u003e\nT2 – 44mm\u003cbr\u003e\nT3 – 20mm\u003c\/p\u003e\n\u003cp\u003eAvailable in 10m and 50m rolls\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirections to apply all decorative stripes:\u003c\/strong\u003e\u003cbr\u003e\nDo not apply stripes to any newly painted or varnished surface, this must be fully cured before application.\u003cbr\u003e\nEnsure the application surface is clean, dry and free from dust and grease. Peel away the backing paper approximately 5cm and position the stripe at the start of the desired line. Unwind and apply to the hull in about 25cm lengths peeling away the backing paper as you do so. As you position the tape, apply gentle pressure to remove any creases and air bubbles. At this stage, it is possible to lift and reposition the stripe taking care not to stretch the tape. Carefully cut each end to the required length using a sharp knife and cutting away from the hull by taking the stripe to the blade. Use a soft cloth to firmly rub over the stripe to ensure a good bond and again, remove any remaining air bubbles. To finish, slowly remove the oversize carrier film where applied.\u003cbr\u003e\n \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer Part Number: B174050092-D3\u003c\/strong\u003e\u003c\/p\u003e","brand":"PSP","offers":[{"title":"Default Title","offer_id":58637506543990,"sku":"TD4050GD","price":102.12,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1078\/5560\/files\/9ee6b7ba-0b75-4420-87f0-68c5845a6f70.jpg?v=1789054250"},{"product_id":"b174050043-d3","title":"PSP Colour Stripe Double Stripe D3 40mm Light Blue 40mm x 50m","description":"\u003cp\u003e5 different combinations of double and triple striping.\u003c\/p\u003e\n\u003cp\u003eAvailable in all our standard colours.\u003c\/p\u003e\n\u003cp\u003eRef – Total Width\u003cbr\u003e\nD1 – 21mm\u003cbr\u003e\nD3 – 40mm\u003cbr\u003e\nT1 – 19mm\u003cbr\u003e\nT2 – 44mm\u003cbr\u003e\nT3 – 20mm\u003c\/p\u003e\n\u003cp\u003eAvailable in 10m and 50m rolls\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirections to apply all decorative stripes:\u003c\/strong\u003e\u003cbr\u003e\nDo not apply stripes to any newly painted or varnished surface, this must be fully cured before application.\u003cbr\u003e\nEnsure the application surface is clean, dry and free from dust and grease. Peel away the backing paper approximately 5cm and position the stripe at the start of the desired line. Unwind and apply to the hull in about 25cm lengths peeling away the backing paper as you do so. As you position the tape, apply gentle pressure to remove any creases and air bubbles. At this stage, it is possible to lift and reposition the stripe taking care not to stretch the tape. Carefully cut each end to the required length using a sharp knife and cutting away from the hull by taking the stripe to the blade. Use a soft cloth to firmly rub over the stripe to ensure a good bond and again, remove any remaining air bubbles. To finish, slowly remove the oversize carrier film where applied.\u003cbr\u003e\n \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer Part Number: B174050043-D3\u003c\/strong\u003e\u003c\/p\u003e","brand":"PSP","offers":[{"title":"Default Title","offer_id":58637506707830,"sku":"TD4050LB","price":102.12,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1078\/5560\/files\/6207f7fe-a88e-42bd-96f8-93a5493b9c43.jpg?v=1789054194"},{"product_id":"b174050042-d3","title":"PSP Colour Stripe Double Stripe D3 40mm Mid Blue 40mm x 50m","description":"\u003cp\u003e5 different combinations of double and triple striping.\u003c\/p\u003e\n\u003cp\u003eAvailable in all our standard colours.\u003c\/p\u003e\n\u003cp\u003eRef – Total Width\u003cbr\u003e\nD1 – 21mm\u003cbr\u003e\nD3 – 40mm\u003cbr\u003e\nT1 – 19mm\u003cbr\u003e\nT2 – 44mm\u003cbr\u003e\nT3 – 20mm\u003c\/p\u003e\n\u003cp\u003eAvailable in 10m and 50m rolls\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirections to apply all decorative stripes:\u003c\/strong\u003e\u003cbr\u003e\nDo not apply stripes to any newly painted or varnished surface, this must be fully cured before application.\u003cbr\u003e\nEnsure the application surface is clean, dry and free from dust and grease. Peel away the backing paper approximately 5cm and position the stripe at the start of the desired line. Unwind and apply to the hull in about 25cm lengths peeling away the backing paper as you do so. As you position the tape, apply gentle pressure to remove any creases and air bubbles. At this stage, it is possible to lift and reposition the stripe taking care not to stretch the tape. Carefully cut each end to the required length using a sharp knife and cutting away from the hull by taking the stripe to the blade. Use a soft cloth to firmly rub over the stripe to ensure a good bond and again, remove any remaining air bubbles. To finish, slowly remove the oversize carrier film where applied.\u003cbr\u003e\n \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer Part Number: B174050042-D3\u003c\/strong\u003e\u003c\/p\u003e","brand":"PSP","offers":[{"title":"Default Title","offer_id":58637506740598,"sku":"TD4050MB","price":102.12,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1078\/5560\/files\/9d6e4749-0d32-4e7b-8479-088b4fc297e8.jpg?v=1789054140"},{"product_id":"b174050070-d3","title":"PSP Colour Stripe Double Stripe D3 40mm Orange 40mm x 50m","description":"\u003cp\u003e5 different combinations of double and triple striping.\u003c\/p\u003e\n\u003cp\u003eAvailable in all our standard colours.\u003c\/p\u003e\n\u003cp\u003eRef – Total Width\u003cbr\u003e\nD1 – 21mm\u003cbr\u003e\nD3 – 40mm\u003cbr\u003e\nT1 – 19mm\u003cbr\u003e\nT2 – 44mm\u003cbr\u003e\nT3 – 20mm\u003c\/p\u003e\n\u003cp\u003eAvailable in 10m and 50m rolls\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirections to apply all decorative stripes:\u003c\/strong\u003e\u003cbr\u003e\nDo not apply stripes to any newly painted or varnished surface, this must be fully cured before application.\u003cbr\u003e\nEnsure the application surface is clean, dry and free from dust and grease. Peel away the backing paper approximately 5cm and position the stripe at the start of the desired line. Unwind and apply to the hull in about 25cm lengths peeling away the backing paper as you do so. As you position the tape, apply gentle pressure to remove any creases and air bubbles. At this stage, it is possible to lift and reposition the stripe taking care not to stretch the tape. Carefully cut each end to the required length using a sharp knife and cutting away from the hull by taking the stripe to the blade. Use a soft cloth to firmly rub over the stripe to ensure a good bond and again, remove any remaining air bubbles. To finish, slowly remove the oversize carrier film where applied.\u003cbr\u003e\n \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer Part Number: B174050070-D3\u003c\/strong\u003e\u003c\/p\u003e","brand":"PSP","offers":[{"title":"Default Title","offer_id":58637506773366,"sku":"TD4050OR","price":102.12,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1078\/5560\/files\/b5246d8c-b870-43dc-a485-6f0aff138d27.jpg?v=1789054085"},{"product_id":"b174050030-d3","title":"PSP Colour Stripe Double Stripe D3 40mm Red 40mm x 50m","description":"\u003cp\u003e5 different combinations of double and triple striping.\u003c\/p\u003e\n\u003cp\u003eAvailable in all our standard colours.\u003c\/p\u003e\n\u003cp\u003eRef – Total Width\u003cbr\u003e\nD1 – 21mm\u003cbr\u003e\nD3 – 40mm\u003cbr\u003e\nT1 – 19mm\u003cbr\u003e\nT2 – 44mm\u003cbr\u003e\nT3 – 20mm\u003c\/p\u003e\n\u003cp\u003eAvailable in 10m and 50m rolls\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirections to apply all decorative stripes:\u003c\/strong\u003e\u003cbr\u003e\nDo not apply stripes to any newly painted or varnished surface, this must be fully cured before application.\u003cbr\u003e\nEnsure the application surface is clean, dry and free from dust and grease. Peel away the backing paper approximately 5cm and position the stripe at the start of the desired line. Unwind and apply to the hull in about 25cm lengths peeling away the backing paper as you do so. As you position the tape, apply gentle pressure to remove any creases and air bubbles. At this stage, it is possible to lift and reposition the stripe taking care not to stretch the tape. Carefully cut each end to the required length using a sharp knife and cutting away from the hull by taking the stripe to the blade. Use a soft cloth to firmly rub over the stripe to ensure a good bond and again, remove any remaining air bubbles. To finish, slowly remove the oversize carrier film where applied.\u003cbr\u003e\n \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer Part Number: B174050030-D3\u003c\/strong\u003e\u003c\/p\u003e","brand":"PSP","offers":[{"title":"Default Title","offer_id":58637506904438,"sku":"TD4050RD","price":102.12,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1078\/5560\/files\/d43d29f8-de52-43e5-88a4-fbdec0bbf3e6.jpg?v=1789054027"},{"product_id":"b174050050-d3","title":"PSP Colour Stripe Double Stripe D3 40mm Sea Green 40mm x 50m","description":"\u003cp\u003e5 different combinations of double and triple striping.\u003c\/p\u003e\n\u003cp\u003eAvailable in all our standard colours.\u003c\/p\u003e\n\u003cp\u003eRef – Total Width\u003cbr\u003eD1 – 21mm\u003cbr\u003eD3 – 40mm\u003cbr\u003eT1 – 19mm\u003cbr\u003eT2 – 44mm\u003cbr\u003eT3 – 20mm\u003c\/p\u003e\n\u003cp\u003eAvailable in 10m and 50m rolls\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirections to apply all decorative stripes:\u003c\/strong\u003e\u003cbr\u003eDo not apply stripes to any newly painted or varnished surface, this must be fully cured before application.\u003cbr\u003eEnsure the application surface is clean, dry and free from dust and grease. Peel away the backing paper approximately 5cm and position the stripe at the start of the desired line. Unwind and apply to the hull in about 25cm lengths peeling away the backing paper as you do so. As you position the tape, apply gentle pressure to remove any creases and air bubbles. At this stage, it is possible to lift and reposition the stripe taking care not to stretch the tape. Carefully cut each end to the required length using a sharp knife and cutting away from the hull by taking the stripe to the blade. Use a soft cloth to firmly rub over the stripe to ensure a good bond and again, remove any remaining air bubbles. To finish, slowly remove the oversize carrier film where applied.\u003cbr\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer Part Number: B174050050-D3\u003c\/strong\u003e\u003c\/p\u003e","brand":"PSP","offers":[{"title":"Default Title","offer_id":58637506937206,"sku":"TD4050GN","price":102.12,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1078\/5560\/files\/655ca5ee-b818-4210-a5d9-d37148f7923a.jpg?v=1789053977"},{"product_id":"b174050100-d3","title":"PSP Colour Stripe Double Stripe D3 40mm Silver 40mm x 50m","description":"\u003cp\u003e5 different combinations of double and triple striping.\u003c\/p\u003e\n\u003cp\u003eAvailable in all our standard colours.\u003c\/p\u003e\n\u003cp\u003eRef – Total Width\u003cbr\u003e\nD1 – 21mm\u003cbr\u003e\nD3 – 40mm\u003cbr\u003e\nT1 – 19mm\u003cbr\u003e\nT2 – 44mm\u003cbr\u003e\nT3 – 20mm\u003c\/p\u003e\n\u003cp\u003eAvailable in 10m and 50m rolls\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirections to apply all decorative stripes:\u003c\/strong\u003e\u003cbr\u003e\nDo not apply stripes to any newly painted or varnished surface, this must be fully cured before application.\u003cbr\u003e\nEnsure the application surface is clean, dry and free from dust and grease. Peel away the backing paper approximately 5cm and position the stripe at the start of the desired line. Unwind and apply to the hull in about 25cm lengths peeling away the backing paper as you do so. As you position the tape, apply gentle pressure to remove any creases and air bubbles. At this stage, it is possible to lift and reposition the stripe taking care not to stretch the tape. Carefully cut each end to the required length using a sharp knife and cutting away from the hull by taking the stripe to the blade. Use a soft cloth to firmly rub over the stripe to ensure a good bond and again, remove any remaining air bubbles. To finish, slowly remove the oversize carrier film where applied.\u003cbr\u003e\n \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer Part Number: B174050100-D3\u003c\/strong\u003e\u003c\/p\u003e","brand":"PSP","offers":[{"title":"Default Title","offer_id":58637507002742,"sku":"TD4050SV","price":102.12,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1078\/5560\/files\/803dcd07-ec4b-428e-8c36-aba6ac4bc14d.jpg?v=1789053319"},{"product_id":"b174050010-d3","title":"PSP Colour Stripe Double Stripe D3 40mm White 40mm x 50m","description":"\u003cp\u003e5 different combinations of double and triple striping.\u003c\/p\u003e\n\u003cp\u003eAvailable in all our standard colours.\u003c\/p\u003e\n\u003cp\u003eRef – Total Width\u003cbr\u003e\nD1 – 21mm\u003cbr\u003e\nD3 – 40mm\u003cbr\u003e\nT1 – 19mm\u003cbr\u003e\nT2 – 44mm\u003cbr\u003e\nT3 – 20mm\u003c\/p\u003e\n\u003cp\u003eAvailable in 10m and 50m rolls\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirections to apply all decorative stripes:\u003c\/strong\u003e\u003cbr\u003e\nDo not apply stripes to any newly painted or varnished surface, this must be fully cured before application.\u003cbr\u003e\nEnsure the application surface is clean, dry and free from dust and grease. Peel away the backing paper approximately 5cm and position the stripe at the start of the desired line. Unwind and apply to the hull in about 25cm lengths peeling away the backing paper as you do so. As you position the tape, apply gentle pressure to remove any creases and air bubbles. At this stage, it is possible to lift and reposition the stripe taking care not to stretch the tape. Carefully cut each end to the required length using a sharp knife and cutting away from the hull by taking the stripe to the blade. Use a soft cloth to firmly rub over the stripe to ensure a good bond and again, remove any remaining air bubbles. To finish, slowly remove the oversize carrier film where applied.\u003cbr\u003e\n \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer Part Number: B174050010-D3\u003c\/strong\u003e\u003c\/p\u003e","brand":"PSP","offers":[{"title":"Default Title","offer_id":58637507068278,"sku":"TD4050WT","price":102.12,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1078\/5560\/files\/f21f23b2-9ea6-4e8b-9166-d03510bef991.jpg?v=1789053930"},{"product_id":"b174050060-d3","title":"PSP Colour Stripe Double Stripe D3 40mm Yellow 40mm x 50m","description":"\u003cp\u003e5 different combinations of double and triple striping.\u003c\/p\u003e\n\u003cp\u003eAvailable in all our standard colours.\u003c\/p\u003e\n\u003cp\u003eRef – Total Width\u003cbr\u003e\nD1 – 21mm\u003cbr\u003e\nD3 – 40mm\u003cbr\u003e\nT1 – 19mm\u003cbr\u003e\nT2 – 44mm\u003cbr\u003e\nT3 – 20mm\u003c\/p\u003e\n\u003cp\u003eAvailable in 10m and 50m rolls\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirections to apply all decorative stripes:\u003c\/strong\u003e\u003cbr\u003e\nDo not apply stripes to any newly painted or varnished surface, this must be fully cured before application.\u003cbr\u003e\nEnsure the application surface is clean, dry and free from dust and grease. Peel away the backing paper approximately 5cm and position the stripe at the start of the desired line. Unwind and apply to the hull in about 25cm lengths peeling away the backing paper as you do so. As you position the tape, apply gentle pressure to remove any creases and air bubbles. At this stage, it is possible to lift and reposition the stripe taking care not to stretch the tape. Carefully cut each end to the required length using a sharp knife and cutting away from the hull by taking the stripe to the blade. Use a soft cloth to firmly rub over the stripe to ensure a good bond and again, remove any remaining air bubbles. To finish, slowly remove the oversize carrier film where applied.\u003cbr\u003e\n \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer Part Number: B174050060-D3\u003c\/strong\u003e\u003c\/p\u003e","brand":"PSP","offers":[{"title":"Default Title","offer_id":58637507264886,"sku":"TD4050YE","price":102.12,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1078\/5560\/files\/0870f777-00fc-4bf8-b69a-39799b037135.jpg?v=1789053849"},{"product_id":"p171910020","title":"PSP Colour Stripe Triple Stripe T1 19mm Black 19mm x 10m","description":"\u003cp\u003e5 different combinations of double and triple striping.\u003c\/p\u003e\n\u003cp\u003eAvailable in all our standard colours.\u003c\/p\u003e\n\u003cp\u003eRef – Total Width\u003cbr\u003e\nD1 – 21mm\u003cbr\u003e\nD3 – 40mm\u003cbr\u003e\nT1 – 19mm\u003cbr\u003e\nT2 – 44mm\u003cbr\u003e\nT3 – 20mm\u003c\/p\u003e\n\u003cp\u003eAvailable in 10m and 50m rolls\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirections to apply all decorative stripes:\u003c\/strong\u003e\u003cbr\u003e\nDo not apply stripes to any newly painted or varnished surface, this must be fully cured before application.\u003cbr\u003e\nEnsure the application surface is clean, dry and free from dust and grease. Peel away the backing paper approximately 5cm and position the stripe at the start of the desired line. Unwind and apply to the hull in about 25cm lengths peeling away the backing paper as you do so. As you position the tape, apply gentle pressure to remove any creases and air bubbles. At this stage, it is possible to lift and reposition the stripe taking care not to stretch the tape. Carefully cut each end to the required length using a sharp knife and cutting away from the hull by taking the stripe to the blade. Use a soft cloth to firmly rub over the stripe to ensure a good bond and again, remove any remaining air bubbles. To finish, slowly remove the oversize carrier film where applied.\u003cbr\u003e\n \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer Part Number: P171910020\u003c\/strong\u003e\u003c\/p\u003e","brand":"PSP","offers":[{"title":"Default Title","offer_id":58637507297654,"sku":"TT1910BK","price":15.32,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1078\/5560\/files\/bd6c466a-e095-48e1-ae92-7fdd09281f76.jpg?v=1789055412"},{"product_id":"p171910041","title":"PSP Colour Stripe Triple Stripe T1 19mm Dark Blue 19mm x 10m","description":"\u003cp\u003e5 different combinations of double and triple striping.\u003c\/p\u003e\n\u003cp\u003eAvailable in all our standard colours.\u003c\/p\u003e\n\u003cp\u003eRef – Total Width\u003cbr\u003e\nD1 – 21mm\u003cbr\u003e\nD3 – 40mm\u003cbr\u003e\nT1 – 19mm\u003cbr\u003e\nT2 – 44mm\u003cbr\u003e\nT3 – 20mm\u003c\/p\u003e\n\u003cp\u003eAvailable in 10m and 50m rolls\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirections to apply all decorative stripes:\u003c\/strong\u003e\u003cbr\u003e\nDo not apply stripes to any newly painted or varnished surface, this must be fully cured before application.\u003cbr\u003e\nEnsure the application surface is clean, dry and free from dust and grease. Peel away the backing paper approximately 5cm and position the stripe at the start of the desired line. Unwind and apply to the hull in about 25cm lengths peeling away the backing paper as you do so. As you position the tape, apply gentle pressure to remove any creases and air bubbles. At this stage, it is possible to lift and reposition the stripe taking care not to stretch the tape. Carefully cut each end to the required length using a sharp knife and cutting away from the hull by taking the stripe to the blade. Use a soft cloth to firmly rub over the stripe to ensure a good bond and again, remove any remaining air bubbles. To finish, slowly remove the oversize carrier film where applied.\u003cbr\u003e\n \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer Part Number: P171910041\u003c\/strong\u003e\u003c\/p\u003e","brand":"PSP","offers":[{"title":"Default Title","offer_id":58637507330422,"sku":"TT1910DB","price":15.32,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1078\/5560\/files\/cb64f55e-6887-4b9b-884c-3c1fc659c71b.jpg?v=1789055842"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1078\/5560\/collections\/PSP_Colour_Swatch_814beda0-dc57-45ec-bda0-85bc8aade1f9.png?v=1789127762","url":"https:\/\/shop.chastheboat.co.uk\/collections\/psp-sail-tapes-copy-2.oembed?page=9","provider":"ChasNewensMarine","version":"1.0","type":"link"}